Jump to content
mueller

Protars 1/9 YZR 500 (OW98) / NS 500

Recommended Posts

Hi guys
Here I will start a WIP which will probably take some time to get ready.
First and foremost, this is not even about the construction but the 3D printing.
And I want to share this with you.
The first thing on the plan was to reprint the rims of the YZR.
Unfortunately, I did not find any drawings on the internet, so I printed them the way I liked them the most.
It was not an easy task, because I did not want to succeed in the first 3 D pressure.
Constructed with DesignSpark Mechanical. Printed with Elegoo Mars

right side kit rim
see you next time :)
ow1.JPG.9a9bcc225bd46f7f1a4662e739953a69.JPG

Share this post


Link to post
Share on other sites

Cylinder head, approximately after Racer No. 1 NS500
Screws and head 3 D print

See you next time .

kop13.JPG
 

 

kopf31.JPG

Edited by mueller

Share this post


Link to post
Share on other sites

The motivation for me to try my hand at 3D printing is high! Nice work Mueller!

  • Like 1

Share this post


Link to post
Share on other sites

Thanks Guys .
Chain for NS 500 ....... Two is Better .

61157096_kettesttzen.JPG.87274de75dbbad7a5a32f47e8c10f0a8.JPG
kettei.JPG.8f90844a2d10c1b59b5d2d77bb4e2e65.JPG
I've also made handles, with the old Protar kit were none of them.
Little contrast, I hope you recognize something .
griffe.JPG.f236e6ed7cde258bc1301faed4531e0a.JPG

Share this post


Link to post
Share on other sites

sorry just had a lot to do ......
Well I think the 1:12 chain would still be possible.
I will scale down the chain and then we'll see.

Share this post


Link to post
Share on other sites
On 10/11/2019 at 5:17 PM, Plastic Freak said:

Whoa! Those are fantastic. 

 

What's  the probabilty of getting 1/12 scale with that kind of detail, slim to non? 


@Scalelabmodels  is currently working on a 1:12 3D printed chain over on his Facebook page  Scalelab models

  • Thanks 1

Share this post


Link to post
Share on other sites

thanks for the link Dallas.
As you can see on the link you can print 1/12 chains.
Here's my chain scaled to 1/18, is still so.
Everything is just a little filigree and fragile
.
Chainring 0.4 mm Chain max. 1mm
chain.JPG.3df175993b8aa6b148e3bc9e19a79f98.JPG

chain18JPG.jpg.a4648c6ab5f8ea9358fb010796ce1199.jpg
 

And I also went a bit further,
For the NS 500 I printed a few more parts
gab1.JPG.fdf2602af5af51b4de8720149a7519d3.JPG
Until see next time

Share this post


Link to post
Share on other sites

Join the conversation

You can post now and register later. If you have an account, sign in now to post with your account.

Guest
Reply to this topic...

×   Pasted as rich text.   Paste as plain text instead

  Only 75 emoji are allowed.

×   Your link has been automatically embedded.   Display as a link instead

×   Your previous content has been restored.   Clear editor

×   You cannot paste images directly. Upload or insert images from URL.


×
×
  • Create New...