andrew59it

I broke almost all the pin of the Suzuki GSX750 where the tubes are connected.... very thin and fragile.... In the next suzuki (RG400) or Kawasaki 500 I think I will replace all with metal rods.... it's very complicated replace them when they break on pieces already installed just because you touched a tube

On aliexpress.... it was the cheaper one

Finally completed.... .

What a great job...!!! My compliments.... the white is decals or paint ? It's so perfect....

Thank you for the info I should have it.... an old bottle..... are the ones you can buff?

Wow! The tank seems of real metal.... Which paint did you use? Nice work overall....

Love it.... which pearl white did you use for the panels?

After a long time the fairing is ready.... just the rivets and the pe missing Made a stand to display the bike naked....

Here it is...

Working very slowly.... for the moment the spring on the side stand.... pictures will follow.....

No it's not... I tried but the result was really bad.... I used the hasegawa matt black foil https://www.bnamodelworld.com/model-cars-motorcycles-bare-metal-foil-hasegawa-models-ha-71804?zenid=2e0600395a00508dec435fd9bae81d2c

I bought the cheapest on ebay .... ppg deltron D8140 https://www.ebay.it/itm/Vernice-Trasparente-Acrilica-UHS-PPG-D8140-1LT-CATALIZZATORE-D8242-D8242-D8244/273943886185?hash=item3fc853f969:g:KzIAAOSw6ZRdObuM

I had to work on the mirrors, reinforced the joint with 0,7 rod and finally the tank on the bike.... look at the black rubber band on the bottom of the tank :brig: and the seat... and the rubber edge also on the glass ...

@Griffo_Aus PPG 2k

I think it has no heat shield